Vertical Vibration Table

Material Properties Analyzer

Tensile strength, Compressive strength, Flexural bending strength, Friction Scratch, Residual Stress

Home > Products > 재료물성분석기 (UTM) 및 잔류응력 측정기 (XRD)

Structural Test Systems

Table rated for 275 kg payload capacity
Table designed for natural frequency in excess of 100 Hz
Table delivers vertical axis movement along one axis (Z-axis)
Vertical movement provided by means of a 50 kN dynamic rated double ended, double acting pedestal mount servo-hydraulic actuator
Actuator is designed for low stick-slip effect, with adequate side load carrying capacity with assured sine wave quality.
Concentric and internally mounted LVDT for displacement measurement
On board hydraulic manifold with 100 L/min direct drive servovalve
MEMS accelerometers (2) rated for 35g, 100 Hz
Hydraulic Power Supply, Controller and Software

TestResources. USA

Texture Analyzer 다축 미세재료 물성분석기 (µ-TXA™, Multi-axis Micro-Texture Analyzer) µ-TXA™는 하이드로겔 및 생체조직과 같이 매우 연질한 시료의 미세한 인장압축강도를 정확하고 재현있게 측정하는 기기로, 최소 0.001 gf (0.01 mN)의 하중과 재현성을

0 24,528

Single Purpose Test Machine 404-ANSI-Z87.1 Drop Weight Impact Test Machine TestResources’ 404-ANSI-Z87.1 drop weight impact test machine is designed to test glass and plastic

0 1,009

Structural Test Systems Vertical Vibration Table FEATURES & BENEFITS Table rated for 275 kg payload capacity Table designed for natural frequency

0 7,987

Structural Test Systems Horizontal Uniaxial Vibration Table TestResources Horizontal Uniaxial Vibration Tables perform seismic simulation, solid liquefaction an

0 8,229

Structural Test Systems 3 Axis Earthquake Shake Table Simulator Our 3 Axis Shake Table or most commonly known as Earthquake Simulator is used for evaluating specim

0 8,089

Structural Test Systems Automotive Multiaxis Shake Table B-MAX Multi-Axis Shake Table is designed to perform durability and performance evaluation of automot

0 8,048

Structural Test Systems Ball Joint Test System B-BJ Ball Joint Test System performs durability and performance evaluation of ball joint system by s

0 8,118

Structural Test Systems CV Joint Test System B-603 CV Joint Test System enables constant velocity testing per SAE J 2028. The test setup evaluate

0 7,593

Structural Test Systems Damper Test Machine The Alternate Torque Rotational test bench applies a servo-controlled alternate torque to a clutch d

0 7,591

« 1 2 3 4 5 »

« 1 / 5 »