HOME    MOBILE    SITEMAP    CONTACT    ENGLISH   쇼핑몰            

  HOME >  제품소개> 제품소개 모바일 뷰   




 

조회 수 : 18729
2013.02.15 (09:28:13)
Product Category:  TGA, Proximate Analyzer 
Standard:  ISO11722 Solid mineral fuels – Hard coal
ISO1171 Solid mineral fuels
ISO562 Hard coal and coke
ASTM D5142-09 - Coal and Coke
GB/T212-2008 - Coal 
Output Properties:  Weight loss 
Application:  (1) determine the moisture, volatile matter and ash content in coal, coke and solid bio mass fuel samples, and calculate the fixed carbon content and gross calorific value,
(2) analyze the carbon content in coal ash and ash cinder samples,
(3) determine the moisture, volatile matter and ash content in petroleum coke sample, and
(4) analyze the loss on ignition of cement. 

SDLA718 Proximate Analyzer



sdla718_proximate_analyzer.jpg

 

Continuous test for batch analysis

 

· SDLA718 proximate analyzer adopts dual-furnace configuration, low-temperature furnace for moisture test, and high-temperature furnace for ash and volatile matter test.

The high-temperature furnace tests next batch of samples when it has cooled down to 500℃ within 30min. And crucibles can be loaded while the cooling is proceeding.

 

· Original weights of samples are weighed by xternal balance. The operator can pre-weigh the next batch of samples during the active analysis. And the operator doesn’t need to wait for cooling to conduct weighing.

· Crucibles can be introduced and removed at high temperature by the auto-sample loading device. The operator doesn’t need to wait for furnace cooling.

· Moisture and ash can be tested simultaneously; test efficiency is 50% higher than ordinary proximate analyzers. The efficiency of one analyst operating one SDLA718 equals that of three analysts simultaneously operating two drying ovens and three muffle furnaces.

 

Ultra-low balance drift and high accuracy

· The original sample weight is weighed at ambient balance by external balance, and the sample residual is weighed by internal balance which is installed under low-temperature furnace.

The influence of balance drift is reduced to the lowest.

· SDLA718 proximate analyzer imitates the working condition of drying oven and muffle furnace, and all types of coals can be tested accurately.

 

 

Patented technologies and stable performance


 · Sundy develops a clamping device for crucible and crucible lid. The crucibles and lids will not fall down during the test.

 · The imported guide rail introducing device ensures the stable moving of clamping device.

 

 

Easy to operate

· With CAN bus interface, several sets of SDLA718 proximate analyzer can be controlled by a single computer. And each analyzer works independently.

· User-friendly Windows-based software provides flexible data management. Test results can be printed.

And balance and network are connected by standard interface RS232.

 

 

Applications and Conformance with Standards



· Applications
SDLA718 proximate analyzer can be used to:
(1) determine the moisture, volatile matter and ash content in coal, coke and solid bio mass fuel
samples, and calculate the fixed carbon content and gross calorific value,

(2) analyze the carbon content in coal ash and ash cinder samples,
(3) determine the moisture, volatile matter and ash content in petroleum coke sample, and

(4) analyze the loss on ignition of cement.

 

· Conformance with Standards:
· ISO11722 Solid mineral fuels – Hard coal – Determination of moisture in the general analysis test sample
by drying in nitrogen
· ISO1171 Solid mineral fuels –Determination of ash
· ISO562 Hard coal and coke – Determination of volatile matter
· ASTM D5142-09 Standard Test Method for Proximate Analysis of the Analysis Sample of Coal and Coke
by Instrumental Procedures
· GB/T212-2008 Standard Test Method for Proximate Analysis of Coal

 

 

Specifications

· Sample weight: (0.5~1.1) g
· Maximum temperature: 950℃
· Temperature control precision: ±3℃ (Moisture) & ±5℃ (Ash, Volatile matter)
· Max sample: 18 samples
· Test time: Depends on test method selected.
· Shortest analysis time: Full indexes for 3 batches of samples (54 samples) within 8h
· Power requirement: 220 V±10%, 50Hz
· Max power: 4.5kw

profile
번호
 
11 M3600 Viscometer
Grace Instruments, USA
Output Properties: Viscosity
10 M4600 HPHT Linear Swell Meter
Grace Instruments, USA
Output Properties: Volumetric expansion (or contraction) of a core/wafer sample
9 M5600 HPHT Rheometer
Grace Instruments, USA
Output Properties: - G', G", Phase angle, N', K', all with the same API geometr...
8 M6500 Spinning Drop Tensiometer
Grace Instruments, USA
Output Properties: Interfacial tension, Surface tension, Absorption rate, Low interfa...
7 M7500 Ultra HPHT Rheometer
Grace Instruments, USA
Output Properties: Viscosity, Torque, Shear Rate, Shear Stress
6 M7500LSM Ultra HPHT Linear Swell Meter
Grace Instruments, USA
Output Properties: Volumetric expansion (or contraction)
5 M7500PVT Ultra HPHT Pycnometer
Grace Instruments, USA
Output Properties: Liquid density, Viscosity, Rheology
4 M8500 Ultra HPHT Dynamic Sagging Tester
Grace Instruments, USA
Output Properties: Sagging
3 M9100 Automatic Core Flow Tester
Grace Instruments, USA
Output Properties: Core flow
2 M9200 HPHT Foam Rheometer
Grace Instruments, USA
Output Properties: Foam half life, Digital measurement of bubble size and distribution
1 M9300 Foam Loop & Core Flow Tester
Grace Instruments, USA
Output Properties: Permability changes to a formation core, Dynamic leakoff of foam, dam...
Tag List

 

회사 소개

 회원이용약관

 개인정보보호정책

 이메일 무단수집 거부

 

 

 

 

 

(우)07783 서울특별시 강서구 곰달래로 208 청송평화빌딩1층(화곡동849-22)

  Phone: 02)2675-0508 (대표) A/S: 02)2675-0566 Telefax: 02)6918-6568


 Copyrightⓒ 2017 YEONJIN S-tech. Scientifics. Ltd. All Rights Reserved. Contact
administrator for more information.