메뉴 건너뛰기

Surface Techniques

Adhesion Testing Equipment, Patterning and Surface Texturing System, Plasma Surface Treatment System

ATC B-SERIES BATCH COATING SYSTEMS

AJA International사의 ATC-B Series Batch Coating System은 여러 개의 기판을 소규모로 생산 가능하도록 제작되는 맞춤형 스퍼터링 증착 시스템 (sputtering and evaporation system) 입니다. 특정 요구 사항에 따라 실린더형 또는 박스형 챔버가 사용됩니다. 처리 시간이 길어지는 경우, 재료가 기판 또는 마그네트론 스퍼터 소스로 떨어지지 않아 단락으로 인한 공정 중단이 없어 수평한 마그네트론 스퍼터링이 일반적으로 가장 많이 쓰입니다. 


To optimize these systems for a given PVD process, AJA engineers can draw on a long history of standard and custom sputter source and substrate holder designs to satisfy the specific needs of the application. For example, the ATC-B 3400-H horizontal cylinder has special magnetron sputter sources which are designed to reliably run a 50,000 layer processes that can take up to 4 days to complete.

 

 

 

 

TYPICAL BATCH COATING SYSTEM CONFIGURATIONS

Typical Box Chamber Configurations

ATC-H-2020
For coating substrates up to 300mm in diameter,
this system accommodates up to (4) 4” sputtering
sources  simultaneously using (2) sources at different
angles to uniformly coat 300mm  Ø area.
This tool also includes a broad beam End Hall ion source
for substrate pre-clean and sample preparation.
ATC-2030-E
A box coater with multi pocket rotary e-beam source
and dual thermal sources. This model was fitted
with a (4) x 4" wafer flat planetary substrate holder.


 


 

 

 

 

 

 

 

 

ATC-B-2436
For CD mastering, this system handles one rotating
substrate at a time and employs a single AJA Nautilus
Series Rotating magnetron for optimum uniformity.
ATC-B-2848
Small in-line coater designed to utilize AJA STXL
rectangular magnetrons to coat multiple substrates
on a moving pallet. The pictured system was used
to make large quantities of 1mm x 5xmm,
temperature sensitive Platinum on ceramic sensors
for use in thermostats.

 

 

 

 

 

 

 

 

 

 

Typical Cylindrical Chamber Configurations

ATC-B-3400-H
Extended process side sputtering batch coater
designed for a proprietary application requiring 
40-50 thousand layers per run.  
Custom AJA STXL-EO (extended operation) magnetrons 
were designed to prevent aborted processing 
due to source shorting.  This system will process
(8) 6" substrates or hundreds of smaller substrates per batch.
ATC-B-3400
Mask making tool processes (6) 8" wafers per batch
with up to (3) materials deposited
from AJA TR5313 triangular magnetrons
for optimum uniformity. The system also includes
a 7 substrate cassette in the load-lock
to boost throughput up to (60) 8" substrates
(or thousands of small substrates) per 8 hour period.


 

 

 

 

 

 

 

 

 

 

ATC 2200-H Horizontal Sputter Coater
Capable of coating concave, 25 mm thick, X-ray mirror substrates up to 300 mm in diameter with +/- 2% uniformity utilizing (4) in-situ tilt sputter guns.  The substrate carrier can also be replaced by planetary tooling for a batch of 3D objects or small wafers or coupons.

 

ATC 2200-UHV-DMD 
The bake jacketed UHV system above is configured to coat up to (4) 4" diameter, 1" thick Ge substrates per batch from both sides by utilizing an in-situ substrate pallet flipping mechanism. 
Substrate Holder
RF biasable batch substrate holder with in-situ flipping capability
Load-Lock 
with heavy duty magnetic transfer system for 6 kg substrate pallet


 

 

 

 

 

 

 

SPUTTERING SOURCES

AJA has designed and delivered over 100 different types of magnetron sputter sources since 1991.  AJA has the capability to precisely match the sputter source to the requirement with proven technology. The STXL Series (linear, 50 mm to 150 mm wide and up to 1 meter long), the STX Series (5" to 12" diameter), the Nautilus Series Rotating Magnetrons (8", 10" and 12" diameter), the TR Series Triangular Magnetrons and the CTM Series Hollow Cathode Cylindrical Magnetrons (2" to 12" ID) are all AJA designs with proven track records which can be employed to get the job done as efficiently and as reliably as possible.

Most AJA production magnetron sputter sources feature the unique modular magnet array allowing the sources to be configured for balanced, unbalanced, magnetic material and facing target sputtering.

AJA STXL Magnetron
 AJA's STXL Series Magnetrons feature direct-cooled copper backing plates for maximum deposition rate  and easily accessible magnet arrays.  This allows the end user to choose between optimum uniformity or  optimum target utilization of up to 60-70%. The sources feature integral gas injection and high power RF  or DC operation. Rectangular versions in 75, 100, 125 and 150 mm widths are offered up to 1 meter long.  Both internal mount (via flex hose or solid tube) and external flange mount designs are available.

 

AJA CT1210
 Cylindrical target magnetron used for 3D  sputtering  
where substrates are immersed into the  target /  cathode.
AJA TR5313
Triangular magnetrons specialty sources designed
to optimize deposition uniformity onto a circle of substrates
up to 8" Ø.


 

 

 

A340-XP UHV 4" Sputter Source Array
 Sources feature in-situ tilting and are ideal for  uniform
coatings on multi-substrate pallets up to  300 mm Ø.


 

Custom AJA STXL-EO (extended operation) 
Tunable magnetrons with water cooled isolation designed
to prevent aborted processing due to source shorting.
AJA NT-80
Configurable magnet array allows the user to optimize target utilization, uniformity, or even "intentional non-uniformity". This source has also been used with segmented, multi-material targets depositing onto spinning substrates to perform direct, variable co-depositions from a single magnetron as the power supply output is synchronized to change power for each segment being sputtered. 


 

SUBSTRATE HOLDERS - HEATING / COOLING

AJA has designed over 130 different types of customized substrate holders and fixturing for custom pilot production batch coating systems since 1991. 

These include rotating, indexing, linear and planetary motion, plus heating, cooling and RF/DC biasing. Different aspects of these proven designs can be combined to create a new, yet highly reliable custom substrate holder. Reliable substrate holder design is one of the most crucial parts of a custom batch coater and manufacturer experience can easily account for the difference between a maintenance intensive machine and the high throughput machine everyone desires.

Rotary Substrate Platen 
 Accommodates up to (9) 6" wafers, 6 (8") wafers 
 or a large number of smaller substrates.
This  continuously rotating assembly can be configured  
with RF/DC bias, backside heating and a "quick    
 exchange" substrate pallet.
Flat Planetary 
Features (4) manually removable carriers for convenient,
bench-top substrate mounting or cleaning. The assembly
accommodates (4) 100 mm wafers or numerous smaller
substrates. Larger versions holding up to four 300 mm Ø 
wafers are also available.

 

 

 Rotary Substrate holder 
 Accommodates up to (8) 2.0”x 1.5" substrates  
capable of continuous rotation and position  indexing
via stepper motor control.  Also 
 compatible with load-lock transfer.

 

Rotary Substrate Platen 
Accommodates up to 300 mm Ø substrates.
Mounted on hinged door for easy access
and includes positionable quartz crystal thickness
monitor.

 

 

 

 

 

 

 

 

 

 

 

 

 


 

PHASE II-J COMPUTER CONTROL

The AJA Labview based Phase II-J computer control system is used on all ATC-B Series Batch Coaters. This straightforward, user friendly control system utilizes a large, flat-screen laptop in a 19” rack drawer connected to a single 7” high x 19” wide rack mount hardware module. The back panel of the hardware module is populated with connectors to interface to all aspects of the sputtering system.

The Phase II-J control system allows the user to operate in either the “manual mode” or the “automated processing mode”. In the “automated processing mode”, the user designs process “layers” which are then compiled and saved as a “process”. The system allows 104 unique user entry points which are accessible only by password, limiting access to a user’s layers and preventing unexpected corruption of a user’s saved processes.

The standard Phase II-J control system will accommodate up to (5) DC power supplies, (4) RF power supplies, (1) 4-way DC switchbox, (1) 4-way RF switchbox, (4) process gases, closed loop automatic pressure control and substrate temperature control. Processes are aborted if plasma is not detected. Special “soak layers” can be easily incorporated into the process. Finally, data logging is standard with an adjustable refresh period. Process data can be downloaded to common spreadsheet programs.

Labview Computer Control
 Large screen laptop on convenient slide drawer 
 for Labview based  ATC system computer control.  
Replacement laptops are always in stock. 
Computer Control Module Phase IIJ PLC
Compact 4U rack mount case.  This module is fitted
from the outset with all receptacles for quick field retrofits/upgrades.


 

 

 

 

 

 

 

 

SYSTEM OPTIONS

Collimated and Broad Beam Ion Sources
Positionable QCM


 

 Turbomolecular and Cryogenic Vacuum Pumps
Cryogenic Vacuum Pumps with Automated  Pump Control


 

RF, DC, Pulsed DC and HIPIMS Power Supplies
Easy Access,Tip-In, Utility Boxes for  Pneumatics
Cooling/Flow Sensors and for  Non- Hazardous Gases


 

Labview based Computer Control on convenient  
slide drawer
Power Distribution Modules for 208V and 
 380V systems


 

Sputtering Targets
Automatic Closed-Loop, Downstream  
  Pressure Control with alternate Position Mode 
  for Upstream Control


 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

share
« 1 2 3 »
« 2 / 3 »