메뉴 건너뛰기

Thermal Analyzers

ARC, Dielectric Cure Monitor (DEA), Plastic identification, Proximate analyzer, TGA

LT-451 Precision Dielectric Cure Monitor (DEA, Dielectric analyzer)

LT-451 Dielectric Cure Monitor는 경화성 재료의 열경화 또는 UV 광경화 과정 중에 변화되는 전기적 특성 (resistivity)를 측정하여 경화성 수지의 경화과정에 대한 초기 흐름성, 최대 흐름성, 겔타임과 같은 gelation, 경화 완료시간(cure time), 경화 후 절연성을 실시간으로 확인할 수 있는 새로운 분석 기술입니다. 즉, 경화 메카니즘에 대한 케미컬의 영향, 반응속도, 제형, 공정 파라미터를 구하는 데 효율적인 기기입니다. 본 제품은 연구개발, 품질보증/품질관리, 제조공정 상에서 사용 될 수 있는 유일한 기법이며, 고분자 가공공정에 바로 적용가능한 정량적 정보를 제공해줍니다. 본 제품을 이용한 경화거동분석에는 Varicon Disposable Variable Conductivity Sensor와 CERAMICOMB-1”  Reusable Dielectric Sensor가 사용됩니다. 

LT-451의 0.001 Hz ~ 100 kHz의 넓은 주파수 범위는 유전체 특성 (dielectric property) 연구를 위한 frequency sweep과 매우 높은 고유저항 (resistivity) 및 이온 점도 (ion viscosity,  매우 낮은 전도도 및 손실 계수)에 대해 탁월한 감도를 제공합니다. 또한 경화 온도와 경화 속도, 재료 특성의 상관 관계를 연구한는 데 크게 도움됩니다.

ASTM D150-98과 KS C2135에 따른 고분자 필름 및 시트, 절연지에 대한 유전율 (permittivity), loss factor, dissipation 등의 전기적 물성은 LT-4203 Parrlelel Plate Testing Fixture를 함께 사용하여 측정할 수 있습니다. 액체 시료의 유전 특성 (dielectric properties)은 LT-4123 Liquid Dielectric Test Cell을 사용해  측정합니다.

 

  • 0.001 Hz ~ 100 kHz의 넓은 주파수 범위
  • 유전체 특성 연구를 위한 frequency sweep이 가능합니다. 
  • 매우 높은 고유저항 (resistivity) 및 이온 점도(ion viscosity - 매우 낮은 conductivity와 loss factor)에 대한 감도를 제공합니다. 
  • 온도센서를 통해 재료 특성과 경화 속도에 대한 상관 관계를 연구할 수 있습니다.
  • 채널 수: 1, 2, 4, 8 채널
  • 채널 수 추가는 필요 시 언제라도 업그레이드가 가능합니다. 
  • 경화 모니터링 파라미터의 정의
  • 일회성 또는 재사용 가능한 sensor를 사용할 수 있습니다.
  • CureView 데이터 포집 전용 소프트웨어 제공

 

The LT451 is available with one, two or four channels. Each channel consists of one dielectric sensor input and one thermocouple input. Instruments may be upgraded at any time with additional channels, and an external four-channel multiplexer is available. Dielectric inputs may be ordered for either mid-conductivity or high-conductivity ranges.

The CureView Data Acquisition Software has functions for defining cure monitoring parameters; data acquisition, analysis and recall; plotting and printing.

When used with either disposable or reuseable dielectric sensors, also available from Lambient Technologies, or the users own sensors, the LT-451 Dielectric Cure Monitor and CureView data acquisition software form a complete measurement system for studying dielectric material properties in all processing environments.

 

Materials

  • Epoxy
  • Polyurethane
  • Polyester
  • Polystyrene
  • Composites and laminates
  • Bulk molding compound/Sheet molding compound
  • Paints and coatings

 

Processing environments

  • Ovens
  • Presses
  • Autoclaves
  • Pultruders and extruders
  • Batch reaction vessels

 

Specification

 

Excitation frequency range: 0.001 Hz to 100 kHz

Available excitation frequencies (Hz) :

0.001 0.0015 0.002 0.0025 0.003 0.0035 0.004 0.0045 0.005 0.006 0.007 0.008 0.009
0.01 0.015 0.02 0.025 0.03 0.035 0.04 0.045 0.05 0.06 0.07 0.08 0.09
0.1 0.15 0.2 0.25 0.3 0.35 0.4 0.45 0.5 0.6 0.7 0.8 0.9
1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 6.0 7.0 8.0 9.0
10 15 20 25 30 35 40 45 50 60 70 80 90
100 150 200 250 300 350 400 450 500 600 700 800 900
1.0 K 1.5 K 2.0 K 2.5 K 3.0 K 3.5 K 4.0 K 4.5 K 5.0 K 6.0 K 7.0 K 8.0 K 9.0 K
10 K 15 K 20 K 25 K 30 K 35 K 40 K 45 K 50 K 60 K 70 K 80 K 90 K
100 K                        

Excitation amplitude: Sine wave, 1.0 V nominal (2.0 V peak-to-peak)
Base instrument accuracy:

  • 0.001 Hz to 10 KHz: 0.1 dB gain, 0.1 deg phase
  • 15 KHz to 100 KHz: 0.5 dB gain, 2.0 deg phase

Available interfaces: Mid-conductivity, High-conductivity

Inputs: 1-dielectric sensor, 1 thermocouple / channel, 2-start/trigger, 4-uncommitted analog input (±10 V range)

Outputs: 2-TTL/digital outputs

Dielectric sensor type: Interdigitated, parallel plate or single electrode for Mid- or High- Conductivity interfaces

Thermocouple type: J standard, K by special order

Number of channels: 1 channel for LT-451A, 2 channels for LT-451B, 4 channels for LT-451C

Communications: RS-232C, USB with adapter

Physical:

  • Dimensions: 43.2 cm W x 40.6 cm L x 13.3 cm H, Weight: 10 lbs (4.5 Kg)
  • Electrical Power: 100 VAC - 240 VAC, 50/60 Hz autoswitching universal input, 4 A max
 

LT-451 Precision Dielectric Cure Monitor (DEA, Dielectric analyzer)
The LT-451 Precision Dielectric Cure Monitor is a compact, versatile instrument designed for R&D, Quality Assurance/Quality Control, and Production applications involving thermoset materials--resins, composites, paints and coatings. The LT-451 Dielectric Cure Monitor is a compact, versatile instrument designed for Research & Development, Quality Assurance/Quality Control, and Production applications involving thermoset materials--resins, composites, paints and coatings.
The wide 0.001 Hz - 100 KHz frequency range of the LT-451 allows frequency sweeping for studies of dielectric properties, and sensitivity to very high resistivity and ion viscosity (very low conductivity and loss factor). The associated thermocouple input allows correlation of temperature with cure rate and material properties.
share
공업분석기 (Auto TGA) SDLOI1000 Loss on Ignition Analyzer SDLOI1000 can be used to determine the LOI,moisture and ash of solid samples.Including moisture and
댓글 0
22,508
Chemical Application Thermal Safety Software (TSS) TSS-ARKS Thermal Safety Series - Advanced Reaction Kinetics Simulation software suite for processin
댓글 0
994
« 1 2 »
« 2 / 2 »