PRODUCT INFORMATION Model# G115 Roller Made to requirements Length Made to requirements Width Made to requirements Diameter Made to requirements FEATURES & BENEFITS Used to test peel resistance of adhesive bonds between a relatively flexible adhered and rigid adhered of a sandwich structure and its core Meets ASTM D1781, DIN 53295 & EN 2243 requirements Product Literature G115 Series Climbing Drum Peel Test Fixture

Model# G240K Force 1 to 5 kN (225 to 1,125 lbf) Thickness Four models from 10 mm to 50 mm (0.39 in. to 1.97 in.) Screw action, or manual mechanical vice style grips provide a simple and effective way of gripping test specimens. They are successful and affordable and serve a wide range of applications. The grips feature interchangeable dual-acting jaw faces that can be adjusted to handle different specimen thicknesses. Note: Optional adapters or mechanical connections available for all test machines. Product Literature G240K Mechanical Vice Action Grip

PRODUCT INFORMATION Force 100 N (22 lbf) Thickness 8mm (0.31 in) or 46 mm (1.81 in) Screw action, or manual mechanical vice style grips provide a simple and effective way of gripping test specimens. They are successful and affordable and serve a wide range of applications. The grips feature interchangeable dual-acting jaw faces that can be adjusted to handle different specimen thicknesses. Product Literature G227 Mechanical Vice Action Grip

PRODUCT INFORMATION Model# G49 Force Made to requirements Base Length Made to requirements length Made to Requirements FEATURES & BENEFITS Measures peel adhesion at a 180 degree peel Optional adapters made for all test machines

PRODUCT INFORMATION Model# GTB030 Note: Optional adapters or mechanical connections available for all test machines.

PRODUCT INFORMATION Model# GTB020 For laminated release coatings, electrical products, paper and film Note: Optional adapters or mechanical connections available for all test machines.

PRODUCT INFORMATION Model# G50 Force 10 kN (2,250 lbf) Length 300 mm (11.81 in) standard - other lengths available Sample Width 55 mm (2.16 in) standard; 130 mm (5.12 in); 260 mm (10.24 in); Wider Optional G50 family of 90 peel tables consist of a sample loading table mounted on bearings. The lateral movement of the table is directly connected to your test machine crosshead by a cable and pulley system and optional mechanical test machine adapters. The majority of the test specimen is clamped or attached to the table surface and the other end held by a standard grip mounted to the machine crosshead. As the crosshead or actuator moves, the cable transfers that movement to the peel table which moves laterally. The typical setup maintains a constant angle for the 90 degree peel, which prevents extraneous forces on the specimen. The force required to peel the specimen is then monitored by the test machine Product Literature G50 Family Peel Table 90 Degree Fixture

PRODUCT INFORMATION Model# GC67-849 Maximum Force 2,225 kN (500,000 lbf) For the break load test of brick and clay tile, ASTM has outlined specific requirements for the test specimen, and test fixture. The load is applied at the to the test specimen at the midpoint through a steel bearing plate of specific thickness, length and length. Reference ASTM Standard C67, 2009, Standard Test Method for Sampling and Testing Brick and Structural Clay Tile, Drawing is copyright ASTM International, West Conshohocken, PA, 2009 Product Literature ASTM C67 3-Point Fracture Brick Structural Clay Tile | GC67-849

PRODUCT INFORMATION Model# GD7774-103 GD7774-103 Modular Bending Fixture helps measure the flexural fatigue properties of plastics in accordance with ASTM D7774. This bending fixture is configurable to test 3 and 4 point bends for Procedure A and B of ASTM D7774. This bending fixture is applicable to rigid and semi-rigid plastics. Procedure A of ASTM D7774 For Procedure A requires a three point bending fixture. A specimen of rectangular cross section is braced by two double-sided supports and is loaded by means of a double-sided loading nose midway between the supports. A support span-to-depth ratio of 16:1 is used. The specimen is cyclically loaded equally in the positive and negative directions to a specific stress or strain level at a uniform frequency until the specimen ruptures or yields. Procedure B of ASTM D7774 For Procedure B a 4 point bend fixture is required. A specimen of rectangular cross section is braced by two double-sided supports and is loaded by means of two double-sided loading noses, each an equal distance from the adjacent support. Load span-to-support span ratios can be 1:2 or 1:3. The specimen is cyclically loaded equally in the positive and negative directions to a specific stress or strain level at a uniform frequency until the specimen ruptures or yields. Product Literature ASTM D7774 Modular Bending Fixture for Plastics Fatigue Tests | GD7774-103