Get the Most Versatile Dynamic & Fatigue Test Machines
Choose from 12 different systems with 100's of opportunities
Choose from all-electric dynamic test machines or higher frequency servohydraulic test machines. These machines are used to determine the durability of a material, component or product, and are suitable for tensile, compression, and alternating load tests. The majority of applications are best served with our all-electric systems, however, servohydraulic actuators are recommended for very high loads and for demanding fatigue testing applications.
Start by Selecting a Series
Learn more about each series so you can make the right decision. When you're ready to complete your system, contact us and an application expert will help you optimize your system to your test requirements and budget.
840 Series Low Force Dynamic Test Machines
Maximum Frequency: 15 Hz
Maximum Force: 1.5 kN (335 lbf)
The all-electric test systems are optimized for both dynamic and static testing. These systems are compact, lightweight and is the ideal solution for low force fatigue testing.
| Maximum Force | Column Spacing | Maximum Frequency | Frame Type | |
| 840E1-11 | ±50 N (±11 lbf) | 203 mm (8 in) | 5 Hz | Tabletop |
| 840E2-50 | ±220 N (±50 lbf) | 203 mm (8 in) | 15 Hz | Tabletop |
| 800E2-100 | ±440 N (±100 lbf) | 405 mm (16 in) | 15 Hz | Tabletop |
| 840E2-335 | ±1.5 kN (±335 lbf) | 203 mm (8 in) | 15 Hz | Tabletop |
800 Series All-Electric Dynamic Test Machines
Maximum Frequency: 15 Hz
Maximum Force: 50 kN (11250 lbf)
The all-electric test systems are optimized for both dynamic and static testing and is the ideal solution for mid force testing. These systems deliver high performance without the need for expensive hydraulic or pneumatic air supplies, making them an affordable mid force fatigue testing solution.
| Maximum Force | Column Spacing | Maximum Frequency | Frame Type | |
| 800E2 | ±2.5 kN (575 lbf) | 405 mm (16 in) | 15 Hz | Tabletop |
| 800E3 | ±5 kN (1125 lbf) | 405 mm (16 in) | 15 Hz | Tabletop |
| 810E4 | ±15 kN (575 lbf) | 405 mm (16 in) | 15 Hz | Tabletop |
| 810E5 | ±30 kN (6750 lbf) | 506 mm (20 in) | 15 Hz | Tabletop |
| 820E6 | ±50 kN (11250 lbf) | 506 mm (20 in) | 5 Hz | Floorstanding |
900 Series Servohydraulic Test Machines
Maximum Frequency: 100 Hz
Maximum Force: 25 kN (5500 lbf)
The servohydraulic dynamic test systems are optimized for both dynamic and static testing and is the ideal solution for testing high capacity materials and components. These high performance systems serve a wide range of low force, high force and high speed test applications.
| Maximum Force | Column Spacing | Maximum Frequency | Frame Type | |
| 900H6.6 | ±6.6 kN (1500 lbf) | 300 mm (12 in) | 100 Hz | Tabletop |
| 900H10 | ±10 kN (2250 lbf) | 400 mm (16 in) | 75 Hz | Tabletop |
| 900H25 | ±25 kN (5500 lbf) | 450 mm (18 in) | 60 Hz | Tabletop |