메뉴 건너뛰기

Material Properties Analyzer

Tensile strength, Compressive strength, Flexural bending strength, Friction Scratch, Residual Stress

TEC 4000 X-Ray Diffraction System

TEC 4000 시스템은 두 개의 검출기와 함께 구동되고, 빠르고 정확하게 유연한 측정을 위해 단일 또는 이중, 다중 노출 (multiple exposure)를 수행 할 수 있습니다. 측정 데이터는 시스템과 함께 공급되는 TEC사의 사용자 친화적인  Sara TEC ™ 소프트웨어로 분석됩니다. 본 제품은 연구실, 작업 현장 또는 현장에서도 사용이 가능합니다. TEC 응력 분석기 (stress analyzer)는 전 세계적으로 30년 이상 지속적으로 판매되었습니다. TEC 4000 X-ray 회절 시스템은 TEC의 입증된 정확한 기술과 언제 어디서나 수행 할 수있는 적응성이 결합된 기기입니다.

Flexibility & Speed for Residual Stress & Retained Austenite Analysis

 본 제품은 편리한 사용, 빠른 측정 속도, 유연성 및 휴대성을 위해 설계된 컴팩트한 시스템으로, 회절계 (diffractometer), 제어 캐비닛 및 PC로 구성됩니다. 시스템은 인체 공학적으로 디자인되었으며 샘플 자동 거리 조절 기능이 있어 setup이 간편합니다.

 

 

Features

  • ASTM E915과 ASTM E975에 따른 잔류응력 (residual stress)및 잔류오스테나이트 (retained austenite) 측정
  • 구획 절단없이 대형 구조물 측정
  • Open beam operation에 대한 ANSI 43.2 충족
  • 121 ~ 167˚의 2θ range
  • 자동화된 깊이 제어 (software)
  • Multiple peak-fitting routines
  • Principal Stress, Triaxial Stress and Depth Profiling software
  • SAE HS-784
  • SAE SP-453

 

TEC4000.jpg

Specifications

 

X-Ray Tube

  • Pre-aligned
  • 30 KV/6.7mA/200W
  • Cr Tube is standard
  • Quick change out
  • Self-contained water cooling system
  • Automatic tube recognition
  • Integrated level for ease of setup

 

Collimators

  • Standard 1, 2, 3, 4, 5 mm circular
  • Optional 0.5, 1.0, 1.5, 2.0, 3.0 x 5.0 mm rectangular

 

Goniometer

  • Single-, double-, and multiple-exposure techniques
  • Ψ angle range -45° to +60°
  • Operates with 1 or 2 detectors
  • Operates in Ψ or Ω orientation
  • 156° bracket(s) standard
  • Sample-to-detector distance: 3.55” (90.25 mm)
  • X-ray emission-to-sample distance: 0.81” (20.57 mm) nominal
  • Can be operated horizontally and vertically
  • Standard quad leg table-top mount
  • Adjustable oscillation over entire Ψ angle range
  • Automated sample-to-detector distancing

 

Detector(s)

  • Miniaturized PSD, approximately 2.5 times as efficient as CCD and PDA detectors (5.9 KeV x-rays)

 

CPU

  • Pentium IV processor (minimum), Flat panel monitor, and color printer are standard

 

Software

  • TEC의 SaraTEC ™ Windows 10™ 소프트웨어
  • 잔류 응력 및 잔류 오스테나이트 데이터 포집 메뉴
  • x-ray power control
  • goniometer control
  • 설정 메뉴
  • full color spectra and spectra comparison display
  • d-spacing vs. sin²Ψ and intensity vs. sin²Ψ report displays
  • peak fit display
  • 관심 영역 디스플레이
  • 재료 라이브러리
  • 엑스레이 튜브
  • collimators
  • penetration correction
  • depth analysis
  • batch processing
  • automated Ψ movement
  • 온라인 도움말
  • Automated Ψ and Z movement
  • Integrated X, Y, Φ automated movement optional.

 

Safety

  • Open-beam operation을 위한 ANSI 43.2의 요구 사항을 충족하도록 설계된 fail-safe system. Light beam, floor mat, 인클로저, 틸트, beacon 및 경보 알람과 같은 거의 모든 유형의 safety interlock 이 가능합니다. 틸트 스위치와 light beam이 standard이며, 다른 모든 것은 option입니다.

 

Cables

  • High voltage, control, and cooling system cables; each 15 feet in length (4.57m). Optional longer cables available.

 

Electrical Power

  • 10 VAC, 60 Hz; or 220 VAC, 50 Hz

 

Dimensions

  • Nominal Cabinet 25”H x 26”D x 10”W; 63.5cm H x 66cm D x 25.4cm W
  • Goniometer 6”H x 7”D x 10.5”W; 15.3cm H x 17.8cm D x 26.7cm W
  • Quad Leg 12”H x 12”D x 20”W; 30.5cm H x 30.5cm D x 50.8cm W

 


TEC 4000 X-Ray Diffraction System

 

share
Single Purpose Test Machine 4625-D1238 Melt Flow Indexer Melt Indexer is made according to ASTM D1238. MI value means to measure polymeric material at certai
댓글 0
1,139
Single Purpose Test Machine ASTM C39 Concrete Compression System The concrete compression test machine is an integrated testing solution with TestResources controls.
댓글 0
1,055
« 1 2 3 4 5 »
« 4 / 5 »