메뉴 건너뛰기

Element Analyzers

CHNS Analyzer, XRF, AES, OES, Spark-OES, AAS, AFS, ADX

WFX-110A1120A/130A Flame/Graphite Furnace Atomic Absorption Spectrophotometer, AAS

Innovated rich oxygen air-acetylene flame analysis technique (WFX-I IOA) The patented flame analysis technique adopting rich oxygen air-acetylene flame as the substitution for nitrous oxide-acetylene flame for high temperature element analyses, such as Ca, Al, Ba, W, MO, Ti, V, etc. Flame temperature is continuously adjustable between 2300-2950 0C, which makes it possible to choose the best atomization temperature for different elements. It features easy operation, low analysis cost and wide flame AAS analytical range. Rich oxygen flame will not pollute the environment and is not harmful to human bodies. It's a break-through in flame AAS analysis.

 

Integrated flame/graphite furnace atomization system, changeable with flame emission burner

  •    Automatically controlled changeover of the integrated flame and graphite furnace atomizer featuring easy operation and time saving eliminates human labor.
  •    Aflame emission burner head can be installed to perform flame emission analysis to Alkali metals as K, Na etc. (WFX-110A/120A)

 

Accurate fully automated control system

  •    Automatic multi-lamp turret, automatic adjustment of lamp current and optimization of light beam position.
  •    Automatic wavelength scanning and peak picking
  •    Automatic spectral bandwidth changing
  •    Automatic changeover between flame and graphite furnace operation, automatic optimization of position parameters, and automatic ignition

 

Reliable fully automatic graphite furnace analysis

  •    Adopting FUZZY-PID and dual curve mode light-controlled temperature control technique, temperature auto-correction technique, ensures fast heating, good temperature reproducibility and high analytical sensitivity. The temperature control accuracy is less than 1%.
  •    Graphite furnace with pneumatic control and pressure lock ensures constant pressure and reliable contact.

 

Perfect safety protection measures

  •    Alarm and automatic protection to fuel gas leakage, abnormal flow, insufficient air pressure and abnormal flame extinction in flame system;
  •    Alarm and protection function to insufficient carrier gas and protective gas pressure, insufficient cooling water supply and over-heating in graphite furnace system.

 

Advanced and reliable electronic design

  •    Adopting large-scale programmable logic array and Inter 12C bus technology
  •    European type sockets and AMP adapters with high reliability to ensure long term reliability of the whole electronic system.

 

Easy and practical analysis software

 Easy-to-use AAS analysis software is made under Windows operating system, realizing fast parameter setting and optimization.

Automatic display of measured data, automatic calculation and analytical result automatic print out

 

SPECIFICATIONS

Main Specification
Wavelength range
190-900nm
Wavelength accuracy
±0.25nm
Resolution
Two spectral lines of Mn at 279.5nm and 279.8nm can be separated with the spectral bandwidth of 0.2nm and valleypeak energy ratio less than 30%.
Baseline stabilit
SO.004A/30min
Background correction
The D2 lamp background correction capability at 1A is better than 30 times.
The S-H background correction capability at 1.8A is better than 30 times. (only for WFX-110A/120A)
Hollow Cathode Lamps
Lamp turret
6-lamp turret (WFX-110A/120A),
4-lamp turret (WFX-130A)
Auto-alignment, fully automated scan and peak-picking.
Lamp current adjustment
Automatic adjustment and display.
Wide pulse current: 0—25mA,
Narrow pulse current: 0—10mA
Lamp power supply mode
400Hz square wave pulse
100Hz Narrow square wave pulse + 400Hz wide square wave pulse (WFX-110A/120A)
Optical System
Monochomator
Single beam, Czerny-Turner design grating monochromator
Grating
1800 1/mm
Focal length
277mm
Blazed wavelength
250nm
Spectral bandwidth
0.1nm, 0.2nm, 0.4nm, 1.2nm automatic change.
Flame Atomizer
Burner
10cm single slot all-titanium burner
Spray chamber
Corrosion resistant all-plastic spray chamber.
Nebulizer
High efficiency glass nebulizer with metal sleeve, sucking up rate: 6-7mL/min
Emission burner
Provided with WFX-110A/120A
Graphite Furnace
Temperature range
Room temperature—30000C
Heating rate
20000C/s
Gra hite tube dimensions
28mm (L) x 8mm (OD)
Characteristic mass
Cd ≤ 0.8 x 10^-12g, Cu ≤ 5 x 10^-12g, Mo ≤ 1 x 10^11g
Precision
Cd ≤ 3%, Cu ≤ 3%, Mo ≤ 3%
Detection and Data Processing System
Detector
R928 Photomultiplier with high sensitivity and wide spectral range.
Software
Windows operating system
Analytical method
Working curve auto-fitting; standard addition method; automatic sensitivity correction; automatic calculation of concentration and content.
Repeat times
Maximum 20 times of repeat measurement, automatic calculation of mean value, standard deviation and relative standard deviation.
Multi-task function
Sequential measurement of multi-elements in one sample
Condition reading
With model function
Result printing
Measurement data and final analytical report printout, editing with Excel.
Standard RS-232 serial port communication
Characteristic Concentration and Detection Limit
Normal Air-C2H2 flame
Cu: Characteristic concentration ≤ 0.025mg/L, Detection limit ≤ 0.006mg/L;
Rich oxygen Air-C2H2 flame
Ba: Characteristic concentration ≤ 0.22mg/L
Al: Characteristic concentration ≤ 0.4mg/L (for WFX-110A)
Function Expansion
Hydride vapor generator can be connected for hydride analysis.
Dimensions and weight
1020 (L) x 490(W) x 540 (H) mm (main unit), unpacked 80kg
420 (L) x 420 (W) x 460 (H) mm (graphite furnace), unpacked 50kg
WFX-110A1120A/130A Flame/Graphite Furnace Atomic Absorption Spectrophotometer

 

share
« 1 2 3 4 »
« 4 / 4 »