메뉴 건너뛰기

Online Analyzers

Acidity, Alkalinity, Ammonia, Carbonate, Chloride, Chlorine, Chromium VI (ppb), Total Chromium, Free Copper Cyanide

Total Cyanide, Fluoride, Water Hardness, Hypophosphite, Iron, Electroless Nickel, Peroxide, pH (auto calibrated), Phenol

SC1/SC2, Silica, SO2 / Sulfite, Surfactant, Thiocyanate, Zinc, Anodize Line, Process Line, Plating Line, Wastewater Analyzers

TISOMIC H2S, H2O and CO2 process analyzer

Analyzer for measuring hydrogen sulfide (H2S), moisture (H2O), carbon dioxide (CO2)

독특한 PA-TDL 기술이 적용된 TISOMIC은 최신 전자 기술을 사용하여 H2S, H2O 및 CO2에 대한 온라인 공정 분석기 (on-line process analyzer)입니다.  TISOMIC의 일반적인 응용분야에는 multiphase crude oil의 H2S부터 판매 가스 및 파이프 라인 모니터링의 H2S, H2O 및 CO2까지 모두 포함됩니다.

 

Key benefits

  • Close to zero maintenance
  • No moving parts
  • Stable and simple calibration
  • Full separation of photo acoustic measuring cell and electronics
  • Detection range from low ppm to percentage levels
  • No limitations in natural gas matrix
  • Simultaneous multi-stream measurement of hydrogen sulfide (H2S), moisture (H2O), carbon dioxide  (CO2) possible
  • Analyzer cell flow of ±200 sccm/min

 

“We have veritually no maintenance on the TISOMIC analyser, further it has a very small measuring cell and therefor hardly any gas emission. The analyser measures for us both low H2S, H2O, and COcontent”

 

 PA-TDL Technology

The TISOMIC with PA-TDL technology, Measuring the Photo Acoustic effect excited by a Tunable Diode Laser (TDL), can simultaneously measure hydrogen sulfide (H2S), moisture H2O), carbon dioxide  (CO2) in liquid and gas streams. Our PA-TDL technology consists of a high-quality microphone for detecting the Photo Acoustic resonance created by a tunable diode laser in the measuring cell. Analyzing in the low ppm range is achievable by using a resonator with a 10 centimeter path length, without the use of moving parts and multi-pass mirrors.The product features include:

  • Low, less-than-200cc/min cell flow
  • Wide range over four decades (log scale)
  • Temperature controlled cell
  • Full separation of sample-wetted parts and electronics by using fiber optics

When the TISOMIC is used with a well-designed sample conditioning system, such as the Hobré HIFISC, it can run with a drift of typically less than 3% over a year. Automatic validation or manual calibration is required only once every few months. Designed to be low maintenance, with power as its only utility, the cost of ownership is the lowest on the market.

 

Certificates


 

 

Technical specs

Excitation Tunable Diode Laser (TDL)
Detection Photo Acoustic (PA)
Components H2S, H2O, and CO
Number of lasers Up to 4
Number of process streams Up to 2
Sample wetted parts SS316 (as standard) *
Electronics housing / protection Aluminium (salt water proof according to EN 13195-1) / IP65 NEMA 4x
Cell housing / protection SS316 / IP65
PA cell dimensions ± 100 mm (width)
PA cell temperature 50 °C (80 °C optionally)
PA cell pressure Atmospheric
Flow through PA cell < 200 cm3/min
Calibration Once every 3 – 6 months
Analog outputs 4 x 4 – 20 mA
Communication 1 x MODBUS RTU over RS485 and 1 x modbus RTU over TCP/IP
Digital outputs 6V, 24V or potential free, 1 x analyzer fault, 5 x programable output
Hazardous area execution built to ATEX II 2G Ex db op pr [ib] IIB+H2 T3 Gb
  IECEx Ex db op pr [ib] IIB+H2 T3 Gb
  CSA Class 1 Zone 1 BCD T3
Ambient conditions Operating temperature range -20 to 45°C**
Utilities Power: 110 – 240 VAC / 40 – 60Hz
Analyzer dimensions 1200 x 600 x 500 mm (LxWxD)
Analyzer weight ± 150  kg
Range Low precision: 0 – % Levels (programable)
  High precision: 0 – 100 ppm (programable)
Repeatability Low precision: 1% of full scale
  High precision: 0,3 ppm
HMI Exi terminal

 



share