메뉴 건너뛰기

고무 재료 및 제품 측정분석 솔루션

Universal Testing Machine (UTM) from Testresources, USA

Rubbers and elastomers are polymers that exhibit a degree of viscoelasticity and possess the ability to undergo large deformation while under stress and still be able to return to their original shape when the material is unloaded. Because of their unique characteristics elastomers and rubbers have a wide range of uses including but not limited to seals, belts, restraints, bands, stoppers, coatings, and vibration dampeners. These products are often used in the automotive, medical and other similar industries due to their flexibility and strength.

Rubber and Elastomer Testing Goal:

Testing rubber and elastomer determines whether they may be used in specific applications. Normally rubber is used in situations that require a product capable of large amounts of deformation and still be able to return to their original shapes afterwards. To test for this characteristic the materials are tested in tension, compression, adhesion and impact to determine the elastic modulus, the tensile and compressive strength, the elongation or reduction of area at break, how it will respond to shock forces and the adhesion force between the elastomer and reinforcing material. These characteristics define the expected limits of the material samples tested, which gives a depiction of how the rubber or elastomer will behave under stress.

Common Rubber Test Methods:

Rubber and elastomers are tested using various tension, compression, and adhesion tests. These tests are similar to those performed on other materials, but the key difference is in the control of the environment. The properties of rubber and elastomers change sometimes significantly depending on their temperature, ozone and fluid exposure and age. It is very important to test these materials under the proper conditions as the measured values may be different from those that the material will exhibit during its application. For example some elastomers will crystallize at low enough temperatures, which will result in the nature of the material changing from very ductile to very brittle and will significantly lower its tensile strength and elasticity.

Rubber and Elastomer Testing Specimens:

Test samples made from rubber and elastomer can take many different shapes but are usually formed by either using a die cutter to cut the sample from a sheet of the material like using a cookie cutter or by using a mold and pouring or pressing the material into the desired shape. The shape these test samples can take range from dog bones for tensile testing to butterflies for tear testing to spheres or cylinders for compression and impact testing among many others. Once the specimens have acquired the proper shape they must be prepared according to the required specifications of the test procedure. This generally involves heating or cooling the sample to a desired temperature, allowing it to age, or exposing it to a predetermined amount of air, sunlight, or fluid. These variables are used to alter the characteristics and properties of the test specimen in order to properly observe the reaction the material will show during the conditions of its application.

Related Articles

Applicable Standards