Highlights
High precision & accuracy
- Two internal balances away from high temperature and heat radiation, no drift occurs.
- With automatic calibration function, each weighing is accurate and reliable.
- Simulate test environment and condition of drying oven and muffle furnace, exact in accordance with standard.
- The unique automatic cleaning function of low temperature furnace completely eliminates the influence of dust on result.
High efficiency
- Dual furnaces design, low-temperature furnace for moisture test and high- temperature furnace for ash and volatile matter test.
- Analysis for moisture, ash and volatile matter can be conducted simultaneously and consecutively.
- No blank sample during test. Full index of single batch samples (18 samples) can be finished in 150 min.
Patented technology
- Tailored volatile matter crucible with unique auto-sample loading mechanism avoided the operation of replacement or removal of the crucible cover under high temperature.
- Unique crucible clamp device avoid upset and drop of crucible.
- Unique crucible detection mechanism avoid mistake and missing of placing crucible.
- Unique sample tray positioning mechanism and drive mechanism ensure stable and reliable operation.
Human based design, Environment friendly and energy saving
- Sample tray locates inside, real time data transmission. Weighing sample at room temperature, away from heat radiation.
- Special crucible collector discards residual automatically. No need to clamp crucible at high temperature. Easy and safe operation.
- Equipped with dust collector, environment friendly and clean.
- Compressed air can meet the requirement of gas supply, no oxygen and nitrogen required.
Intelligent control
- Easy to use Windows-based operating software, after finishing the sample weighing, the operator can be free for other tasks.
- Several proximate analyzers can be controlled by a single PC with Ethernet communication technology.
- Strong data processing ability, statistic report and print function, connection with network and balance are available by standard interface RS232.
Specification
|
Description |
SDTGA8000 |
|---|---|
|
Test index |
Moisture, ash and volatile matter |
|
Continuous test in batches |
Yes |
|
Standards |
ISO 11722, ISO 1171, ISO 562, ASTM-D 5142-2009 |
|
Precision |
0.02% RSD (1σ, 1g sample) |
|
Reproducibility |
Ash: 0.30% (<15.00%); 0.50% (15.00~30.00%); 0.70% (>30.00%) |
|
Cooling time required for batches of test |
No |
|
Furnace Cooling (forced air/N2) |
950 to 500°C <30 min |
|
Balance Resolution |
0.0001 g |
|
Quantity of furnace |
2 |
|
Sample introduction and taking |
Automatic |
|
Quantity of sample/ Analysis time |
16 samples / 60 min~90 min (Moisture);16 samples/ 230 min (America Standard Ash), 10 samples / 7 min (ASTM Volatile matter 1) 10 samples / 36 min(ASTM Volatile matter 2) |
|
Sample weight |
0.5 ~ 1.1g |
|
Max. power |
4.5 kW |
|
Furnace Temp |
Room temp. to 1000℃ |
|
Furnace Heating |
Resistance Wound |
|
Temperature Calibration |
Standard thermocouple |
|
Temp.control precision |
±2℃ (moisture) |
|
Gas Flow Rate |
Moisture：Nitrogen or Air 2~4（Furnace Volume /min） |
|
Power requirement |
220VAC 50/60Hz |
|
Gas requirement |
Air / Nitrogen / Oxygen |
|
Gas Pressure |
Air 5 to 6 bar (75 to 90 psi) |
|
Minimum Gas Purity |
Air / Nitrogen / Oxygen 99.5%; dry, oil-free |
|
Sample weighing |
Under normal temp. |
|
Test Temperature |
Moisture 105℃, |
|
Humidity |
＜80% |
|
Dimensions |
1055 x 747 x 656 mm |
|
Weight |
211kg |
|
Operational Control |
Windows-based software on external PC/Windows7/ Windows10 |
|
Advance Calculation |
Yes |
|
Analysis Report |
Yes |
|
Statistics Report |
Yes |
|
System Monitor |
Yes |
SDTGA8000 can be used to determine the moisture, ash and volatile matter as well as calculation of fixed carbon and calorific value in coal, coke, calcined petrol coke and other solid biomass fuel.
Dual Furnaces, dual internal balances, stable performance, accurate test result.
The only proximate analyzer which can test batches of sample without waiting for cooling.
