메뉴 건너뛰기

UV 광경화 시스템 (UV Curing Systems)

Spot curing, Flood curing, LED curing, Conveyor curing

SunRay - High-Power UV Flood Curing Lamp

SunRay는 컴팩트한 고출력 UV 플러드 경화 시스템입니다. 모든 시스템 구성 요소는 케이블 연결이나 원격 전원 박스가 거의 필요하지 않고 옵션인 Stand & Shield, 또는 공정 시설 어디에나 간단하게 장착할 수 있는 소형 램프 헤드에 연동됩니다.

헤드 장착,  전원 코드 연결,  경화 시작!

수명이 긴 400W 또는 600W arc lamp와 parabolic reflector는 균일하게 분포된 UV 로 8 "x 6" 경화 면적을 조사합니다. Arc lamp는 최신 기술의  UV Power-Plus 램프 드라이버로 구동됩니다. 본 시스템의 대형 버전은 SunRay Quad를 참고하세요. 헤드에는 편리한 운반 손잡이와 높이 조절 슬라이딩 브래킷이 있습니다.

 

  • 175 mW/cm2 Intensity @ 3"
  • 8" x 6" curing area
  • Solid-state / Constant Power
  • Compatible with UV Conveyor 40
  • Standby Power Switch
  • Optional UV Shield & Mounting Stand


 

Product Summary

The SunRay is a compact, high-power UV flood curing system. All system components are integrated into a small lamp head which can be easily mounted on the optional Stand & Shield, or anywhere on a factory floor, with virtually no cabling or remote power boxes required. Just mount the head, connect the AC line cord, and start curing! The long life 400 or 600 watt arc lamp and parabolic reflector illuminate an 8" x 6" curing area with evenly distributed UV light. The arc lamp is powered by the state of the art UV Power-Plus Lamp Driver. For a larger version of this system, see the SunRay Quad. The head features a convenient carrying handle and sliding height adjustment bracket.

 

Auto-Range AC Line Input

The Auto-Ranging 90-132 / 180-265 VAC line input makes the SunRay easy to use in any country, with no wiring changes or voltage select switching required.

 

Lamp Power Regulation

The system’s switch mode power supply maintains constant lamp power regardless of variations in AC line input or lamp voltages. This regulation provides for repeatable curing times and longer lamp life.

 

Standby Mode

The unit features a standby mode rocker switch, which reduces lamp power when the system is idling. This mode can be used to reduce heat and stray UV light output while the system is not in use.

 

Elapsed Hour-meter

A front panel hour meter tracks lamp age, allowing for consistent lamp replacement scheduling.

 

 

External Logic Signal Interface

The system can be remotely monitored and controlled using logic signals available at a 15 pin D-sub connector on the unit’s rear panel. The following signal types are available:

  • Lamp standby control input for variable PWM control or for minimizing of lamp intensity during idle periods.
  • Hour meter reset input for zeroing hours after lamp replacement.
  • 24VDC @ 1 Amp output for powering external fans, relays, solenoids or motors.

Lamp off command input and lamp ignited status output signals are available as special order.

 

Forced Air Cooling

Baffled fan cooling directs air to critical system components, ensuring cool operation and high system reliability.

 

Optional Lamp Spectrums

The SunRay is available with UVA, UVB & visible spectrum lamps for the 400W & 600W systems, ensuring compatibility with adhesives and coatings from all manufacturers.

 

Mounting Options

Mounting options include (1) the Stand & Shield, an economical adjustable-height mounting stand and wrap-around UV shield, (2) the Rayven, a fully enclosed curing chamber with door interlock and adjustable shelf, and (3) the UV Conveyor 40 for conveyor curing applications.

 

Specifications

System Type

Parabolic Flood Curing System

Part #

UV0446

UV0830

Lamp Power

400W

600W

Input Voltage

100-120 / 200-240 VAC ±10% (auto-ranging)

Input Current (Max)

7.0/3.5 Amps

10.0/5.0 Amps

Irradiance @ 3"

115 mW/cm2 UVA, typical

175 mW/cm2 UVA, typical

Curing Area

8" x 6"

Weight

11 lbs.

Size (L x W x H)

11” x 10” x 9”

 

System Part Numbers

Part No. Item Details Ordering
UV0446 SunRay 400 Lamp Head, 120/240VAC, 50/60Hz Includes 400W UVA enhanced arc lamp, UV/IR protective glasses, power cord and manual

Request Quote

UV0830 SunRay 600 Lamp Head, 120/240VAC, 50/60Hz Includes 600W UVA enhanced arc lamp, UV/IR protective glasses, power cord and manual

Request Quote

 

Accessories Part Numbers

Part No. Item Details
UV0454 Adjustable Height Flood Stand Used with SunRay for bench top batch curing
UV0455 Wrap-around UV Shield Provides basic UV shielding (used with UV454)
UV1094 Rear UV Shield Supplemental rear protection for blocking low level backside UV light for applications where complete shielding is desirable (used with UV454 & 455)
UV2128 Flood Filter Glass Replacement filter glass for SunRay and IntelliRay floods. Filters shortwave and infrared wavelengths
UV2676 Dichroic Flood Filter Glass Optional dichroic filter glass for SunRay and IntelliRay floods. Passes shortwave and infrared wavelengths
(Multiple) Power Cords Multiple types available
(Multiple) UV Curing Tray Stainless steel non-stick surface
UV1450 Uvicure Plus II Integrating Radiometer UVA, UVB or Visible ranges, 10-10,000mW/cm2
UV0495 UV/IR Protective Safety Glasses OTG (fit over prescription eyewear), 3.0 shade
UV02231 UV/IR Protective Safety Glasses Sport contour, 3.0 shade
UV01889 UV Protective Face Shield Lift-up face shield ideal for maximum UV/Visible light protection, 4.0 shade
UV00503 SunRay 400 Instruction Manual Usage and maintainence info for SunRay 400 System
UV00884 SunRay 600 Instruction Manual Usage and maintainence info for SunRay 600 System

 

Replacement Lamp Part Numbers

Part No. Item Details
UV0320 UVA Metal Halide Lamp 400W medium pressure
UV0544 UVB Enhanced Lamp 400W medium pressure
UV0489 Visible Metal Halide Lamp 400W medium pressure, 420nm
UV0545 Visible Metal Halide Lamp 400W medium pressure, 460nm
UV0834 UVA Metal Halide Lamp 600W medium pressure
UV1884 UVB Enhanced Lamp 600W medium pressure
UV1074 Visible Metal Halide Lamp 600W medium pressure, 420nm

 

                                                            SunRay + Rayven
                                                 Sunray + Stand & Shield


 

 

 

 

 

 

 

 

 

 

 

Uvitron International, Inc.
share
« 1 2 3 »
« 1 / 3 »